Mel Temp Apparatus

The Mel Temp Apparatus is used to determine the melting point range of substances. Learn about it and how to operate it, here.
When chemists want to observe the melting point ranges of substances, they can employ a mel temp apparatus for testing.
The Mel-Temp operates by increasing the system’s temperature to melt small samples. To start, a chemist inserts a capillary tube (up to 3) that is filled with a small amount of the sample. The scientist can then set the dial to a rate that raises the temperature inside the chamber and observe the melting point range.
Melting point experiments are valuable to chemical research. A team of scientists may study the melting point range of a new drug that has a heat resistant additive. Chemists may use the experiments to identify contaminants in soil or debris. In all these scenarios, a Mel-Temp can help scientists learn more about materials.
Learn more about the Mel Temp Apparatus below, including how it’s used and a link to an example protocol!
Mel Temp Apparatus
What is the Mel Temp Apparatus?
The Mel Temp Apparatus is a piece of laboratory equipment used by chemists to observe the melting point of substances. Melting point experiments can help chemists study new materials, formulate new drugs, identify unknown or mixed substances and more.
When scientists observe a substance’s melting point, they record its melting point range. This is a substance’s initial melting point temperature and its final melting point temperature, when the substance is completely liquified. This is described in more detail in Image 2 below.
The Mel Temp Apparatus is critical in determining the melting point range of chemicals. By using a Mel-Temp, scientists can see a magnified view of the reaction, allowing for accurate data. See the parts of the Mel-Temp labeled below.
Mel Temp Apparatus Labeled
Mel Temp Apparatus Parts and Cautions
A thermometer, sample chamber, sample capillary(ies), an observation port, light, a voltage control dial and a power button constitute the Mel-Temp device setup. These pieces are labeled below in Image 1.

When setting up the mel temp apparatus, there are cautions scientists should take. First, the Mel-Temp works by heating. Temperatures may reach up to 200 ℃ (almost 400 ℉). Therefore, the heating element of the Mel-Temp should not be touched.
Additionally, room temperature capillary tubes and thermometers should be put into room temperature Mel-Temps. This stops the glass tubes and thermometers from shattering. Putting cold or room temperature glassware inside a hot Mel-Temp may cause shattering.
Mel Temp Apparatus Capillary Tubes
When operating the mel temp apparatus, up to three samples can be tested at one time.
This is done by taking a capillary tube and crushing its open end into a small pile of sample to be tested. The capillary tube is then dropped to get the sample to the closed end of the tube. The view for the initial vs final melting point range is exemplified below.

It is essential for chemists to not confuse the settling of chemicals for the initial melting point. Deciphering this correctly comes with practice of using the mel temp apparatus. See the following section for a sample Mel-Temp procedure.
How to Use the Mel Temp Apparatus

Interested in how to use the Mel-Temp in a real laboratory experiment? We’ve outlined its applications in this complimentary article, Determination of Melting Points Lab.
In this experiment, an unknown substance is identified by performing a melting point procedure. The melting point range of the unknown can then be compared to known literature melting point values of other substances.
Once narrowed down, the unknown substance can be mixed with each known substance, respectively. Each mixture’s melting point range can be determined using the mel temp apparatus. Whichever mixture has the least experimental variation as compared to its literature value, a chemist can infer that the unknown must be that known compound.
Continue reading this companion article to learn how to the mel temp is used in the laboratory.
Next Steps
We hope this article has helped you get more familiar with the Mel Temp Apparatus and its purpose.
At My Life Science Career, we are committed to being the #1 resource website for scientists and science students. We review laboratory skills, explore beyond the bench careers, post science interview tips and more, for our audience. We desire to help scientists build careers in a holistic way, considering their passions, desired working style and education costs.
Want to be a part of our growing, STEM-minded community? Be sure to connect with us on LinkedIn, Twitter, Instagram and Pinterest for daily science posts. Also, share this article using the buttons at the top and bottom to help another scientist!
Subscribe To Our Newsletter For More Free Science Tips!
Similar Reads
- Code White Hospital Meaning - November 10, 2026
- Code Pink Hospital Meaning - November 3, 2026
- Code Purple Hospital Meaning - October 27, 2026
